Fagor 8065, Руководство по устранению ошибок

Страница: 214 / 220

Error solving manual.
CNC 8060
CNC 8065
·214·
(R
EF
: 1709)
‘A tool cannot be placed in the spindle if there is one in changer arm 2’
DETECTION When forcing a tool as spindle tool.
CAUSE There is a tool in changer arm 2.
SOLUTION Remove the tool from changer arm 2.
‘The tool of the changer arm cannot be placed in the spindle’
DETECTION When forcing a tool as spindle tool.
CAUSE The tool is in changer arm 1.
SOLUTION Remove the tool from changer arm 1.
‘The position does not exist’
DETECTION When loading or unloading a tool from the magazine with or without maneuver.
CAUSE The magazine position does not exist.
SOLUTION Choose an existing position of the magazine.
‘Path %1 not found’
DETECTION When loading, saving or printing the tool table or magazine table.
CAUSE The selected path does not exist.
SOLUTION Define the path properly or create the target folder.
‘File %1 not found’
DETECTION When loading the tool table or magazine table.
CAUSE The data file does not exist.
SOLUTION Choose existing files and indicate its path correctly.
‘Error when saving the data in %1’
DETECTION When saving the tool table or magazine table.
CAUSE The data file could not be created, already exists and has no write permission, is being
used by another application or there is no room on the disk.
SOLUTION Choose another directory to save the tables, give them write permission, close the
application that is using it or free disk memory space.
‘Error opening file %1’
DETECTION When loading, saving or printing the tool table or magazine table.
CAUSE The possible causes are:
• When loading a table. The data file does not exist, it does not have read
permission or is being used by another application.
• When saving a table or printing a table to a file. The data file could not be created,
already exists and has no write permission, is being used by another application
or there is no room on the disk.
• When printing a table to a printer, the printer either does not exist or is configured
wrong.
SOLUTION The possible solutions are:
• When loading a table. Choose existing files, indicate their path correctly, give
them read permission or close the application that is using them.
• When saving a table or printing a table to a file. Choose another directory to save
the tables, give them write permission, close the application that is using it or free
disk memory space.
• When printing a table to a printer, choose an existing printer that is configured
correctly.