Fagor 8065, Руководство по устранению ошибок

Страница: 98 / 220

Error solving manual.
CNC 8060
CNC 8065
·98·
(R
EF
: 1709)
1933 'Live tool missing to execute the cycle'
DETECTION During the execution of the cycle.
CAUSE The channel that executes the cycle does not a spindle for the live tool.
SOLUTION Yield a live tool to the channel or execute the cycle in a channel with live tool.
1934 'Wrong cutter width'
DETECTION During the execution of the cycle.
CAUSE The cutter width is larger than the slot (groove) or the cycle cannot leave the
programmed residual stock.
SOLUTION Check that the selected tool can machine the programmed slot (groove), leaving the
programmed finishing stock.
1935 'No axis has been defined as LONGAXIS in C axis cycle'
DETECTION During the execution of the cycle.
CAUSE No longitudinal axis has been defined in the channel.
SOLUTION Set machine parameter LONGAXIS = TRUE for the longitudinal axis.
1936 'No axis has been defined as FACEAXIS in C axis cycle'
DETECTION During the execution of the cycle.
CAUSE No face axis has been defined in the channel.
SOLUTION Set machine parameter FACEAXIS = TRUE for the face axis.
1937 'No axis or spindle has been defined for C axis'
DETECTION During the execution of the cycle.
CAUSE A canned cycle has been programmed for the C axis, but there is no C axis in the
channel.
SOLUTION Define some axis or spindle of the channel as C axis (parameter CAXIS).
1938 'No axis has been defined for Y axis'
DETECTION During the execution of the cycle.
CAUSE A canned cycle has been programmed for the Y axis, but there is no Y axis in the
channel.
SOLUTION Define a trihedron type axis configuration in the channel (parameter GEOCONFIG)
with a Y axis.
1950 'The Z coordinate of the part surface has not been programmed'
DETECTION During the execution of the cycle.
CAUSE 'The coordinate of the part surface has not been programmed (parameter Z).
SOLUTION Correct the program.
1951 'The safety Z coordinate has not been programmed'
DETECTION During the execution of the cycle.
CAUSE The safety plane has not been programmed (parameter Zs).
SOLUTION Correct the program.
1952 'The part depth has not been programmed'
DETECTION During the execution of the cycle.
CAUSE The part depth has not been programmed (parameter P).
SOLUTION Correct the program.
1953 'The penetration step has not been programmed'
DETECTION During the execution of the cycle.
CAUSE The penetration step (parameter I) has not been programmed.
SOLUTION Correct the program.
1954 'The roughing pass has not been programmed'
DETECTION During the execution of the cycle.
CAUSE The roughing pass (parameter D) has not been programmed.
SOLUTION Correct the program.
1955 'Zero roughing tool radius'
DETECTION During the execution of the cycle.
CAUSE The roughing tool radius is 0.
SOLUTION Correct the value of the tool radius in the tool table or select another tool.