Fagor 8065, Руководство по устранению ошибок

Страница: 93 / 220

Error solving manual.
CNC 8060
CNC 8065
·93·
(R
EF
: 1709)
1864 '#PROBE 1: Parameters U, V, W must be greater than X, Y, Z'
DETECTION During the execution of a #PROBE 1 probing cycle.
CAUSE The tabletop probe position has been defined wrong in the cycle. One of parameters
X, Y, Z is greater than its corresponding parameter U, V, W. Parameters X Y Z refer
to the minimum coordinates of the probe and parameters U V W refer to the maximum
coordinates.
SOLUTION Define the probe position so U > X, V > Y, W > Z.
1865 'Pocket with islands: Roughing T missing'
DETECTION During the execution of the cycle.
CAUSE The programmed tool does not exist in the tool table.
SOLUTION Correct the tool in the table or select another tool.
1866 'Pocket with islands: Wrong roughing F'
DETECTION During the execution of the cycle.
CAUSE The roughing feedrate is 0.
SOLUTION Define a feedrate higher than 0.
1867 'Pocket with islands: Wrong roughing S'
DETECTION During the execution of the cycle.
CAUSE The spindle speed for the roughing operation is 0.
SOLUTION Define a speed higher than 0.
1868 'Pocket with islands: Finishing T missing'
DETECTION During the execution of the cycle.
CAUSE The programmed tool does not exist in the tool table.
SOLUTION Correct the tool in the table or select another tool.
1869 'Pocket with islands: Wrong finishing F'
DETECTION During the execution of the cycle.
CAUSE The finishing feedrate is 0.
SOLUTION Define a feedrate higher than 0.
1870 'Pocket with islands: Wrong finishing S'
DETECTION During the execution of the cycle.
CAUSE The spindle speed for the finishing operation is 0.
SOLUTION Define a speed higher than 0.
1871 'Pocket with islands: Wrong roughing pass'
DETECTION During the execution of the cycle.
CAUSE The roughing pass (parameter

) is greater than tool diameter.
SOLUTION Correct the location code (tool shape) or select another tool.
1872 'Pocket with islands: Wrong finishing pass'
DETECTION During the execution of the cycle.
CAUSE In a 2D pocket, the finishing pass (parameter

) is greater than tool diameter. In a
3D pocket, the finishing pass (parameter

) is 0.
SOLUTION Correct the machining pass.
1873 'Pocket with islands: Wrong side stock (excess material)'
DETECTION During the execution of the cycle.
CAUSE The lateral finishing stock (parameter

) is greater than tool diameter.
SOLUTION Correct the lateral finishing stock or select another tool.
1874 'Pocket with islands: Wrong depth'
DETECTION During the execution of the cycle.
CAUSE The value of parameter P (pocket depth) is 0.
SOLUTION Assign a correct value to the parameter.
1875 'Pocket with islands: XY profile does not exist'
DETECTION During the execution of the cycle.
CAUSE The programmed surface profile does not exist.
SOLUTION Select an existing profile or generate the programmed profile.