Fagor 8065, Руководство по устранению ошибок

Страница: 109 / 220

Error solving manual.
CNC 8060
CNC 8065
·109·
(R
EF
: 1709)
2312 '#KIN ID[]: Program values between 0 and that of machine parameter NKIN'
DETECTION During execution.
CAUSE The CNC has tried to activate a kinematics that has not been defined in the kinematics
table of the machine parameters.
SOLUTION Check the program.
2313 'Programming not allowed outside a profile'
DETECTION During execution.
CAUSE Functions G810, G811, G813, G820, G821, G840, G841, G842, G850 and G841 are
only allowed inside the definition of a profile ProGTL3.
SOLUTION Program the G function after the beginning of a profile with G841 or G842.
2314 'Programming not allowed inside a profile'
DETECTION During execution.
CAUSE The programmed function is not allowed inside the definition of a ProGTL3 profile.
SOLUTION Delete that function, replace it with an equivalent one or end the definition of the
profile.
2315 'Error in the PROGTL3 profile resolving process'
DETECTION During execution.
CAUSE Either the programmed ProGTL3 profile is wrong or has no solution.
SOLUTION Check the program.
2316 'Unresolved PROGTL3 profile has ended'
DETECTION During execution.
CAUSE The programmed ProGTL3 profile has ended without being fully resolved.
SOLUTION Check the program.
2317 'The G809-G820 function cannot have any more points'
DETECTION During execution.
CAUSE Too many points have been programmed in function G809 or G820.
SOLUTION Check the program.
2318 'Undefined geometrical entity'
DETECTION During execution.
CAUSE The programmed entity has not been defined or initialized.
SOLUTION An entity must be defined before it can be used.
2319 'The definition of the geometrical entity does not admit any more elements'
DETECTION During execution.
CAUSE Too many elements have been programmed when defining a geometrical entity.
SOLUTION Modify the entity or use several.
2320 'The element is not tangent'
DETECTION During execution.
CAUSE The indicated element is not tangent to the previous one.
SOLUTION Check the program.
2321 'Tangency is not possible'
DETECTION During execution.
CAUSE The programmed element cannot be tangent to the previous one.
SOLUTION Check the program.
2322 'The element is not valid'
DETECTION During execution.
CAUSE The element has been programmed wrong.
SOLUTION Check the program.
2323 'The arc is not possible'
DETECTION During execution.
CAUSE The programmed arc is not possible with the given data.
SOLUTION Check the program.