Fagor 8065, Руководство по устранению ошибок

Страница: 95 / 220

Error solving manual.
CNC 8060
CNC 8065
·95·
(R
EF
: 1709)
1888 'Pocket with islands: Wrong type of finishing'
DETECTION During the execution of the cycle.
CAUSE The type of finishing (parameter Q) is wrong.
SOLUTION Assign a correct value to the parameters.
1889 'Back-and-forth movement: Distance traveled too short'
DETECTION Execution of the back-and-forth movement for adjusting the inertia.
CAUSE The distance programmed in the back-and-forth movement is not long enough.
SOLUTION Program a longer distance.
1890 'Back-and-forth movement: Distance traveled too long'
DETECTION Execution of the back-and-forth movement for adjusting the inertia.
CAUSE The distance programmed in the back-and-forth movement is too long.
SOLUTION Program a shorter distance.
1900 'Required data not programmed
DETECTION During the execution of the cycle.
CAUSE One or more required parameters have not been programmed. The wrong parameter
will be indicated in the error message.
SOLUTION Program all the mandatory parameters of the cycle.
1901 'Wrong character'
DETECTION During the execution of the cycle.
CAUSE Some cycle parameter has the wrong value. The wrong parameter will be indicated
in the error message.
SOLUTION Correct the program.
1902 'Incompatible starting position and location code (shape) of the tool
DETECTION During the execution of the cycle.
CAUSE The initial position of the tool is not compatible with the location code (tool shape)
and the geometry of the tool.
SOLUTION Position the tool properly or change the tool.
1903 'Arc programmed wrong'
DETECTION During the execution of the cycle.
CAUSE Arc defined wrong in the geometry of the canned cycle.
SOLUTION Correct the program.
1904 'No tool has been programmed'
DETECTION During the execution of the cycle.
CAUSE No tool has been programmed.
SOLUTION Program a tool before the cycle or load a tool at the spindle.
1905 'SLOT MILLING: Zero cutter width'
DETECTION During the execution of the cycle.
CAUSE The tool width is 0.
SOLUTION Correct the tool width or select another tool.
1906 'Wrong tool location code (shape)
DETECTION During the execution of the cycle.
CAUSE The location code (tool shape) is not valid for the programmed cycle.
SOLUTION Correct the location code (tool shape) or select another tool.
1907 'Zero feedrate F before the cycle
DETECTION During the execution of the cycle.
CAUSE The machining feedrate is 0.
SOLUTION Define a feedrate higher than 0.
1908 'No residual stock has been programmed'
DETECTION During the execution of the cycle.
CAUSE The finishing stock is 0.
SOLUTION Define a finishing stock greater than 0.