Fagor 8065, Руководство по устранению ошибок

Страница: 155 / 220

Error solving manual.
CNC 8060
CNC 8065
·155·
(R
EF
: 1709)
6009 'Watchdog at the PC'
DETECTION During execution.
CAUSE The PC does not respond due to loss of RT IT.
SOLUTION Check in diagnosis mode whether there are IT losses and the configuration of the
CAN bus. If the error persists, contact the Service Department.
6010 'Error in COMPCI processes'
DETECTION During execution.
CAUSE Various errors in the processes managed by the COMPCI.
SOLUTION If the error persists, contact the Service Department.
6011 'CAN error in remote node'
DETECTION During execution.
CAUSE Error reported by a node. The error codes being are different for the CANfagor bus
and for the CANopen bus. The error window indicates which module is causing the
error.
Error codes for the CANfagor bus.
Type of module that generates the error for the CANfagor bus.
SOLUTION Contact our technical service department.
Code. Meaning.
1 CAN controller overrun. Possible loss of received messaged.
2 BusOFF. The node detected that the bus dropped.
3 Reception fifo overrun. Possible loss of received messaged.
4 Warning. The error counter exceeds level 1 (96).
11 The node informs that the COMPCI does not respond to the presence
controls.
12 Node reset (power supply problems, short-circuit, watchdog, etc.).
13 Message transmission failure.
Module. Meaning.
1 Analog outputs.
2 Counters.
3 Digital outputs.
4 Digital inputs.
5 Analog inputs.
7 PT100 inputs.
8 CAN keyboard handwheel.
9 Probes.
10 Jog keyboard.
11 Alphanumeric keyboard.
12 One of the I/O nodes failed.