Fagor 8065, Руководство по устранению ошибок

Страница: 164 / 220

Error solving manual.
CNC 8060
CNC 8065
·164·
(R
EF
: 1709)
7011 'In load mode: D not admitted alone'
DETECTION During execution.
CAUSE Magazine in load mode. The offset cannot be programmed alone.
SOLUTION It cannot be programmed like this.
7012 'In load mode: The tool is either worn out (expired) or rejected'
DETECTION During execution.
CAUSE Magazine in load mode. The tool to be loaded into the magazine is worn out (expired)
or rejected.
SOLUTION Program a valid tool.
7013 'In load mode: Wrong position or there is no room in the magazine'
DETECTION During execution.
CAUSE Magazine in load mode. The magazine is full or the indicated position is occupied.
SOLUTION If there is no room in the magazine, first unload a tool. If the indicated position is
occupied, choose another one.
7014 'In unload mode: T is not in the magazine'
DETECTION During execution.
CAUSE Magazine in unload mode. The tool is not in the magazine.
SOLUTION Program a valid tool.
7015 'In unload mode: D not allowed with T'
DETECTION During execution.
CAUSE Magazine in unload mode. The offset cannot be programmed next to the tool.
SOLUTION It cannot be programmed like this.
7016 'In unload mode: D not admitted alone'
DETECTION During execution.
CAUSE Magazine in unload mode. The offset cannot be programmed alone.
SOLUTION It cannot be programmed like this.
7017 'In unload mode: M6 without T'
DETECTION During execution.
CAUSE Magazine in unload mode. An M6 cannot be programmed without a tool.
SOLUTION Program the tool to be unloaded and then the M06 function.
7018 'In unload mode: T with two M6'
DETECTION During execution.
CAUSE Magazine in unload mode. Two consecutive M06 have been programmed for the
same tool.
SOLUTION Program the tool to be unloaded and then the M06 function.
7019 'In setting mode: T0 not admitted'
DETECTION During execution.
CAUSE Magazine in setting mode. T0 cannot be programmed.
SOLUTION Program a tool other than 0.
7020 'In Setting mode: D mandatory'
DETECTION During execution.
CAUSE Magazine in setting mode. The offset has not been programmed.
SOLUTION Program the offset.
7021 'In Setting mode: D not admitted alone'
DETECTION During execution.
CAUSE Magazine in setting mode. The offset cannot be programmed alone.
SOLUTION It cannot be programmed like this.
7022 'In Setting mode: M6 not admitted'
DETECTION During execution.
CAUSE Magazine in setting mode. M06 cannot be programmed.
SOLUTION It cannot be programmed like this.