Enterasys Matrix 2G4072-52, Руководство по настройке, Страница: 457 / 1422

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-5
6.2 SPANNING TREE CONFIGURATION COMMAND SET
6.2.1 Configuring Spanning Tree Bridge Parameters
Purpose
To display and set Spanning Tree bridge parameters, including device priorities, hello time,
maximum wait time, forward delay, path cost, and topology change trap suppression.
Commands
The commands used to review and set Spanning Tree bridge parameters are listed below and
described in the associated section as shown.
•
show spantree stats ( Section 6.2.1.1 )
•
show spantree version ( Section 6.2.1.2 )
•
set spantree version ( Section 6.2.1.3 )
•
clear spantree version ( Section 6.2.1.4 )
•
show spantree stpmode ( Section 6.2.1.6 )
•
set spantree stpmode ( Section 6.2.1.6 )
•
clear spantree stpmode ( Section 6.2.1.7 )
•
show spantree maxconfigurablestps ( Section 6.2.1.8 )
•
set spantree maxconfigurablestps ( Section 6.2.1.9 )
•
clear spantree maxconfigurablestps ( Section 6.2.1.10 )
•
show spantree mstilist ( Section 6.2.1.11 )
•
set spantree msti ( Section 6.2.1.12 )
•
clear spantree msti ( Section 6.2.1.13 )
•
show spantree mstmap ( Section 6.2.1.14 )
•
set spantree mstmap ( Section 6.2.1.15 )
•
clear spantree mstmap ( Section 6.2.1.16 )
•
show spantree vlanlist ( Section 6.2.1.17 )
•
show spantree mstcfgid ( Section 6.2.1.18 )