Endress+Hauser Proline Prosonic Flow 93, Руководство по эксплуатации

Страница: 118 / 168

Commissioning Proline Prosonic Flow 93 PROFIBUS DP/PA
118 Hauser
It is essential to adhere to the following sequence/assignment when configuring the modules in the
PROFIBUS master system:
!
Note!
• The assignment of the measured variables for the Analog Input function blocks (1 to 8) and the
Totalizer function blocks (1 to 3) can be changed by means of the CHANNEL function. A detailed
description of the individual modules is contained in the following section.
• The device has to be reset once a new configuration has been loaded to the automation system.
This can be effected as follows:
– By means of the local display
– By means of an operating program (e.g. FieldCare)
– By switching the supply voltage off and on again.
Slot
sequence
Module Description
1 AI Analog Input function block 1
Output variable
→
volume flow channel 1 (factory setting)
2 AI Analog Input function block 2
Output variable
→
sound velocity channel 1 (factory setting)
3 AI Analog Input function block 3
Output variable
→
flow velocity channel 1 (factory setting)
4 AI Analog Input function block 4
Output variable
→
volume flow channel 2 (factory setting)
5 AI Analog Input function block 5
Output variable
→
sound velocity channel 2 (factory setting)
6 AI Analog Input function block 6
Output variable
→
flow velocity channel 2 (factory setting)
7 AI Analog Input function block 7
Output variable
→
average volume flow (factory setting)
8 AI Analog Input function block 8
Output variable
→
average sound velocity (factory setting)
9
TOTAL or
SETTOT_TOTAL or
SETTOT_MODETOT_TOTAL
Totalizer function block 1
TOTAL
→
output variable = totalized volume (factory setting)
SETTOT
→
totalizer control
MODETOT
→
totalizer configuration
10 Totalizer function block 2
TOTAL
→
output variable = totalized volume (factory setting)
SETTOT
→
totalizer control
MODETOT
→
totalizer configuration
11 Totalizer function block 3
TOTAL
→
output variable = totalized volume (factory setting)
SETTOT
→
totalizer control
MODETOT
→
totalizer configuration
12 DISPLAY_VALUE Default value for local display
13 CONTROL_BLOCK Control of device functions