Endress+Hauser Proline Prosonic Flow 93, Руководство по эксплуатации

Страница: 10 / 168

Identification Proline Prosonic Flow 93 PROFIBUS DP/PA
10 Hauser
2.2 Certificates and approvals
The devices are designed in accordance with good engineering practice to meet state-of-the-art
safety requirements, have been tested, and left the factory in a condition in which they are safe to
operate.
The devices comply with the applicable standards and regulations in accordance with EN 61010-1
"Safety requirements for electrical equipment for measurement, control and laboratory use" and
with the EMC requirements of IEC/EN 61326.
The measuring system described in these Operating Instructions thus complies with the statutory
requirements of the EC Directives. Hauser confirms successful testing of the device by
affixing to it the CE mark.
The measuring system complies with the EMC requirements of the "Australian Communications
and Media Authority (ACMA)".
The flowmeter has successfully passed all the test procedures carried out and is certified and
registered by the PNO (PROFIBUS User Organization).
The device thus meets all the requirements of the following specifications:
• Certified to PROFIBUS Specification Profile 3.0 version
(Device certification number: provided upon request).
• The measuring device can also be operated with certified devices of other manufacturers
(interoperability).
2.3 Registered trademarks
PROFIBUS
®
Registered trademark of the PROFIBUS User Organization, Karlsruhe, D
HistoROM™, T-DAT™, FieldCare
®
, Fieldcheck
®
, Applicator
®
Registered or registration-pending trademarks of Hauser Flowtec AG, Reinach, CH