Endress+Hauser Proline Prosonic Flow 93, Руководство по эксплуатации

Страница: 104 / 168

Commissioning Proline Prosonic Flow 93 PROFIBUS DP/PA
104 Hauser
PROFIBUS Profile GSD file
The function scope of the profile GSD file is defined by the PROFIBUS Profile Specification 3.0. The
function scope is restricted compared to the manufacturer-specific GSD file (complete device
functionality). However, similar devices from different manufacturers can be interchanged with the
profile GSD file without the need to reconfigure (interchangeability).
Profile GSD (multivariable) with ID number 9760 (hex): This GSD contains all the function
blocks such as AI, DO, DI etc. Prosonic Flow does not support this GSD.
!
Note!
• Before configuration takes place, a decision should be made as to which GSD file should be used
to operate the system.
• This setting can be changed via the local display or via a Class 2 master. For configuring via the
local display, see
→
Page 96.
Supported GSD files:
→
ä
82
The Profibus User Organization (PNO) gives each device an identification number (ID No.). The
name of the GSD file is derived from this number.
For Hauser, this ID No. starts with the manufacturer ID 15xx.
To clarify the assignment of the GSD files, the GSD names (apart from the Type files) at
Hauser are as follows:
Name of the PROFIBUS Profile GSD file
Source
Internet (GSD library of the PROFIBUS User Organization)
→
www.PROFIBUS.com
EH3_15xx EH = E Hauser
3 = Profile 3.0
_ = Standard ID
15xx = ID No.
EH3x15xx EH = E Hauser
3 = Profile 3.0
x = Extended ID
15xx = ID No.
ID No. Profile GSD file
PROFIBUS DP 9741 (Hex) PA139741.gsd
PROFIBUS PA 9741 (Hex) PA139741.gsd