manualshive.com logo in svg

Eaton SVCH0203 SPX Advanced, Руководство по применению, Страница: 139 / 185

Поделиться
Скачать
Eaton SVCH0203 SPX Advanced Скачать руководство пользователя страница 139

130

SPX advanced – description of parameters

SPX ADVANCED APPLICATION MANUAL

   SVCH0203—October 2017   www.eaton.com

Code

ID

Description

Notes

P1 .11 .3

11081

Follower torque reference selection “FollowerTorq sel”

Select the source of torque reference for the follower drive.
0 = ”Not Used”
1 = ”AI1” – Analog Input 1
 

Signal scaling in “G: Input Signals\Analog Input 1”

2 = ”AI2” – Analog Input 2
 

Signal scaling in “G: Input Signals\Analog Input 2”

3 = ”AI3”
4 = ”AI4”
5 = ”AI1 Joystick”
 

 Analog input 1, –10 Vdc... +10 Vdc. For joystick inputs, the maximum negative 

reference is the negative of “Torq Ref Max”.

6 = ”AI2 Joystick”
 

 Analog input 2, –10 Vdc... +10 Vdc For joystick inputs maximum negative reference 

is the negative of “Torq Ref Max”.

7 = ”Keypad Ref”Torque reference from keypad R3.5
8 = ”Fieldbus” 
 

 Reference is taken from fieldbus. Alternative scaling can be selected in “G: 

Fieldbus”

9 = ”Master Torque”
 

Reference is taken from Master drive when using the Master Follower function.

P1 .11 .4

1089

Follower stop function “FollowerStopFunction”

When the follower drive does not use the Master Drive Ramp Output as reference this 

parameter defines how the follower drive will stop as Run request is removed from the 

Master drive.
0 = Coasting; the follower remains in control even if master has stopped to fault
1 = Ramping; the follower remains in control even if master has stopped to fault
2 = As master; the follower behaves as master

P1 .11 .5

1326

Master follower brake logic “MF brake logic”

This parameter defines brake functionality when operating Master-Follower mode. 

This parameter is not active when follower is operating in Ramp Follower mode (i.e. 

Follower reference selection is “18 = Master Ramp”) or follower is a DriveSynch 

follower. In these cases follower brake is controlled by master drive.
0 = Master or Own (Default)
   Brake is opened when master or follower brake opening conditions are met in 

follower drive.

1 = Own
   Brake is opened when follower drive own brake opening conditions are met. Also 

brake is close if follower drive own conditions are met regardless of master status.

2 = Own & Master Speed Release
   Brake is opened when follower drive own brake opening conditions are met. Also 

brake is close if follower drive own conditions are met regardless of master status. 

But Speed is not released until drive has the feedback from the brake, actual or 

defined by Mechanical Brake Delay parameter and master has released speed. 

When this selection is made   also in Master drive, Speed is not released until 

master drive has the feedback from the brake actual or defined by Mechanical 

Brake Delay parameter also from followers

3 = Master
  Master drive is controlling follower drive brake and speed release.

When follower reference selection 

is 17 = “Master

Ref”, speed limitation function 

from brake control are

bypassed on follower side.

P1 .11 .6

1093

Master Follower mode 2 selection “MF mode 2”

Selects the Master Follower mode 2 that is used when the DI is activated. When 

Follower is selected the Run Request command is monitored from Master and all other 

references are selectable by parameters. This parameter can be used for redundancy 

purposes. If drive number one is unable to be operated through a digital input drive 

number 2 can be selected as master.
0 = Single Drive System bus is deactivated. 
1 = Master Drive sends control word to follower drive. 
2 = Follower 

   Drive received control word from Master and sends some diagnostic information to 

the Master drive. 

3 = “DSynchMaster” - Drive Synch Master 

   Drive number 1 must be selected as the parallel drive configuration master (in 

redundancy mode drive number 2 can be selected as master but certain diagnostic 

functions are no longer available). 

Содержание SVCH0203 SPX Advanced


























































































































































































Отзывы:

Нет отзывов