manualshive.com logo in svg

Covidien Nellcor GR101704, Руководство по обслуживанию

Поделиться
Скачать
Covidien Nellcor GR101704 Скачать руководство пользователя страница 229

Return Authorization and Shipment

 Service Manual

 12-41

5.

Replace the Main PCB, ensuring all wires and cables remain clear. This is particu-
larly critical for the routing of the dog-leg flex cable and remaining flex cables 
from the LCD display. Reference 

To replace the Main PCB

, p. 12-34.

Note:

The widest flex cable can be ordered separately. Ensure the label printed on the 
cable, J1 DISPLAY SIDE, is visible before connecting to the J1 receptacle on the 
LCD display.

6.

Replace the speaker, ensuring the speaker remains under the retaining clip on the 
plate. Reference 

To replace the alarm speaker

, p. 12-38.

7.

Reassemble the monitoring system chassis. Reference 

Monitoring System Chassis 

Reassembly

, p. 12-20.

12.8

Return Authorization and Shipment

12.8.1

General Instructions for Return

•

Contact Covidien Technical Services or a Covidien Service Center for a Returned 
Goods Authorization (RGA) number and shipping instructions. Reference 

Obtain-

ing Technical Assistance

, p. 1-5. 

•

 If at all possible, pack in the original carton. If not, follow the directions for an 
alternate carton.

•

Mark the carton and any shipping documents with the RGA number.

•

Select a method of shipment which provides tracking and proof of delivery.

•

Unless otherwise instructed, do not include any accessories, cables, or sensors.

Содержание Nellcor GR101704













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды