Covidien Nellcor GR101704, Руководство по обслуживанию

Страница: 70 / 236

Operation
6-8 Service Manual
Figure 6-2. Sensor Type Message
The monitoring system displays dashes for %SpO
2
and Pulse Rate while search-
ing for a valid pulse. For optimal performance, allow the monitoring system to
search and lock onto a pulse for approximately five to ten seconds.
When the monitoring system detects a valid pulse, it enters monitoring mode
and displays patient parameters.
The movement of the blip bar or the plethysmographic waveform and the
flashing heart icon are
visual indicators of real-time data. The pulse beep
tone is an audible indicator of the real-time patient data.
When users first apply a recommended sensor to a patient, the monitoring
system may lose a pulse signal. Upon loss of the pulse signal, the monitoring
system posts an alarm.
6.3.2
Sensor Detection Failure
Upon successful completion of the POST process, the monitoring system
sounds a one-second tone indicating it has passed POST.
Should the monitoring system fail to detect a recommended sensor, it displays
a user prompt indicating it is in the ready state and the caregiver should attach
a recommended sensor to both the patient and the monitoring system.