Covidien Nellcor GR101704, Руководство по обслуживанию

Страница: 90 / 236

Operation
6-28 Service Manual
appropriate equipment must be connected to a grounded AC power source.
Configuring any TCP/IP addresses or entering any network keys requires a USB
keyboard.
To set default remote or serial connectivity
1.
Access the service function menu. Reference To access service function menus , p. 6-18.
2.
Select SETTINGS.
3.
Select CONNECTIVITY SETTINGS.
4.
Select the desired option.
a.
Select REMOTE SETTINGS to set the remote connectivity default.
b.
Select SERIAL CONNECTION to set the serial connectivity default.
5.
Select the desired default. Reference Input and Output Configuration Options , p.
7-2, for a complete listing of setting options.
6.
Select the desired option.
a.
Press SAVE CHANGES to retain the change.
b.
Press CANCEL to leave the default as it was.
To set default WLAN or LAN network connectivity
1.
Access the service function menu. Reference To access service function menus , p. 6-18.
2.
Select SETTINGS.
3.
Select CONNECTIVITY SETTINGS.
4.
Select the desired option.
a.
Select WLAN SETTINGS to set the WLAN connectivity default.
b.
Select LAN SETTINGS to set the LAN connectivity default.
5.
Select the desired default. Reference Input and Output Configuration Options , p.
7-2, for a complete listing of setting options. Reference Network Configuration ,
p. 7-9, particularly in reference to the icon table for the configuration interface.
a.
Select WI-FI to set a wireless connectivity default, using a USB keyboard to
input any TCP/IP address or network key.
b.
Select NETWORK CONNECTION to set the LAN connectivity default, using a
USB keyboard to input any TCP/IP address or network key.
6.
Press FINISH to retain the change.