Covidien Nellcor GR101704, Руководство по обслуживанию

Страница: 160 / 236

Modification and Testing
10-38 Service Manual
Figure 10-17. LIGHT Test: BPM 60, SpO
2
90, MOD low, Light High
a.
No active visual and audio alarms.
b.
Saturation indication between 88 and 92 inclusive.
c.
BPM indication between 57 and 63.
d.
Pulse waveform of approximately half-inch P-T-P amplitude. Actual amplitude
may vary but references low pulse amplitude/high light indications.
15.
Press %SpO
2
.
16.
Verify the 75% LED lights. The monitoring system registers SpO
2
decreases and
stabilizes to a value between 73 and 77 inclusive.
a.
Active visual and audio alarms.
b.
Saturation indication between 73 and 77 inclusive, creating an SpO
2
LOW
alarm condition.
c.
BPM indication between 57 and 63 inclusive.
d.
Pulse waveform of approximately half-inch peak to peak (P-T-P) amplitude.
Actual amplitude may vary but will be a reference for low pulse amplitude/
high light indications.
17.
Press MOD.
18.
Verify the MOD increase LED lights. The pulse amplitude waveform initially increases in
amplitude and then stabilize at P-T-P amplitude of approximately one-inch.