manualshive.com logo in svg

Covidien Nellcor GR101704, Руководство по обслуживанию

Поделиться
Скачать
Covidien Nellcor GR101704 Скачать руководство пользователя страница 138

Modification and Testing

10-16 

 Service Manual

e.

Select PULSE RATE DELAY.

f.

Ensure the delay is set to OFF.

8.

Turn off the monitoring system by pressing the POWER ON key.

Testing Monitoring Settings

Service technicians may choose to test all monitoring settings in sequence. If 
so, reserve turning off the monitoring system until the end of the sequence. If 
not, turn it off after completing the individual test to clear all changes.

To test alarm mode

1.

Turn on the monitoring system by pressing the POWER ON key.

2.

Press MENU. 

3.

Press MONITORING SETTINGS. 

4.

Select ALARM MODE.

5.

Ensure the alarm mode is ADULT ALARM SETTINGS.

6.

Select NEONATE ALARM SETTINGS.

7.

Press SAVE CHANGES.

8.

Ensure the Baby icon appears on the main monitoring screen between both satu-
ration and pulse rate alarm threshold settings.

9.

Press YES.

To test response mode

1.

Turn on the monitoring system by pressing the POWER ON key.

2.

Press MENU. 

3.

Press MONITORING SETTINGS. 

4.

Select RESPONSE MODE.

5.

Ensure the response mode is NORMAL.

6.

Select FAST.

7.

Press SAVE CHANGES.

Содержание Nellcor GR101704













































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды