Conductix-Wampfler SingleFlexLine Program 0815 Скачать руководство пользователя страница 59

Страница: 59 / 128

Operating Instructions

Single-pole Conductor Rail System

SingleFlexLine Program 0815

BAL0815-0002g-US
www.conductix.us

translated document

page 59 of 128

→

Mount or connect the further conductor rail bends in the same way in the customer's support structure (substructure)

NOTE!

The conductor rail must not be bent further when the connector is mounted!

→

Before the last conductor rail bend is mounted in the hanger clamp, slide the connector into the end of the last conductor rail

bend up to the stopper (see Fig. 60).

→

Mount the last conductor rail bend (Pos. 7) in the hanger clamp (B) up to, but in, the last hanger clamp (A) in order for the last

connection point to be flexible. This means that the end of the first conductor rail bend (Pos. 6) and the end of the last conductor

rail bend (Pos. 7) are not yet mounted in the hanger clamp (A) and are now hanging across from each other (see Fig. 65).

The smaller the radius of the conductor rail bend, the greater the risk that the bend will be bent further
or deformed when it is connected. It may therefore be necessary to not mount the conductor rail bend in
more than one hanger clamp.

Fig. 65: Mount the last conductor rail bend

Содержание SingleFlexLine Program 0815

































































































































Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды

Conductix-Wampfler SingleFlexLine Program 0815, Руководство по эксплуатации

Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды