Conductix-Wampfler SingleFlexLine Program 0815 Скачать руководство пользователя страница 112

Страница: 112 / 128

Operating Instructions

Single-pole Conductor Rail System

SingleFlexLine Program 0815

BAL0815-0002g-US
www.conductix.us

translated document

page 112 of 128

Required protective equipment:

DANGER!

Danger of sensitization, irritation of the mucous membranes and respiratory diseases due to

dust!

Dust from the sliding contacts collects in the conductor rails and the guide profile. This dust is very

fine and is categorized as a health risk. Working regularly with the conductor rail system and/or not

applying the requisite level of care when handling accumulated dust (e.g., cleaning the system with

compressed air) can lead to sensitization. People who frequently spend longer periods of time in a

heavily used facility without protective equipment must expect the following

consequences



Irritations of the mucous membranes



Respiratory diseases



Cancer

→

In workplaces with long-term exposure and heavily trafficked facilities, take effective measures to

protect employees from the dust.

→

Personal protective equipment must be worn during all works on the conductor rail system during

which accumulated dust is disturbed.

→

The following personal protective equipment must be worn during cleaning operations:



Protective eyewear



Protective dust mask Class FFP3 (observe local regulations)



Protective gloves



Disposable coverall

→

Before starting work, clean the conductor rail in accordance with regulations (see WV0800-0001).

→

Protect the surroundings during cleaning work, for instance by covering or removing warehouse

goods and blocking access to those areas in which dust could fall down on persons.

→

Do not blow out dust with compressed air

. Instead, vacuum it up. The vacuum cleaner must be

equipped with a Class H fine filter.

→

Do not eat and/or drink while cleaning!

→

Do not smoke while cleaning!

NOTE!

Risk of explosion!

Airborne dust, open flames or other sources of ignition can result in explosion.

Содержание SingleFlexLine Program 0815

































































































































Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды

Conductix-Wampfler SingleFlexLine Program 0815, Руководство по эксплуатации

Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды