Conductix-Wampfler SingleFlexLine Program 0815 Скачать руководство пользователя страница 56

Страница: 56 / 128

Operating Instructions

Single-pole Conductor Rail System

SingleFlexLine Program 0815

BAL0815-0002g-US
www.conductix.us

translated document

page 56 of 128

6.3.3.4

Mounting conductor rail and connector (in closed slip ring applications)

NOTE!

The connector must not be used in straight routes, but rather only in closed slip ring applica-

tions!
The mounting of the connector on a straight route is described in Section 6.3.3.2.

NOTE!

The connector must not be reused!

Requirement:

The hanger clamps are mounted on the customer's support structure (substructure) at the appropriate distance.

Required tool:



Plastic hammer

Work steps:

→

Mount the first conductor rail bend in the hanger clamp (B) up to, but not in the last hanger clamp (A). In order to connect the first

conductor rail bend and the last conductor rail bend, it is important that the end of the first conductor rail bend is not yet mounted

into the hanger clamp. In this way, the flexibility can be used at the last connection point (see Fig. 58).

The smaller the radius of the conductor rail bend, the greater the risk that the bend will be bent or de-
formed when it is connected. It may therefore be necessary to not mount the conductor rail bend in more
than one hanger clamp.

Fig. 58: Mount the first conductor rail bend

Содержание SingleFlexLine Program 0815

































































































































Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды

Conductix-Wampfler SingleFlexLine Program 0815, Руководство по эксплуатации

Результаты поиска

Содержание SingleFlexLine Program 0815

Отзывы:

Бренды по названию

Популярные бренды