3-4
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 3 Configuring the Cisco TelePresence System
First Time Setup
Step 7
In the URL field, type the IP address that you obtained in
Step 3
and press Enter. The browser launches
the Cisco TelePresence System Administration application.
Note
If you need to obtain the IP address, complete the following steps:
a.
On the Cisco Unified IP phone, locate “Manual” at the bottom of the screen and press the Manual
soft key.
Note
If you cannot locate the Manual button, proceed to Step
b.
b.
Locate “Info” at the bottom of the screen and press the Info soft key.
c.
Scroll down to the IP Address listing and copy the address.
Step 8
Log in to the system by entering the following information:
•
Username: admin (case sensitive)
•
Password: cisco (case sensitive)
Note
You can change your password in Cisco Unified CM. See the
Cisco Unified Communications Manager
Configuration Guide for the Cisco TelePresence System
.
Step 9
Click Login. The Device Information window appears, as shown in
Figure 3-3
.
Figure 3-3
Device Information Screen
Note
See the
“Upgrading CTS Codec Firmware” section on page 3-19
for information about upgrading to new
CTS firmware releases.
