6-11
Cisco TelePresence System Release 1.5 Administrator Guide
OL-13676-04
Chapter 6 Troubleshooting the CTS 1100
Managing Hardware Setup
Figure 6-8
Camera Target Menu
The display projects the image from the camera, with the addition of a red plus sign in the center of the
display.
Step 8
Automatically adjust the camera by completing the following steps:
a.
In the Auto Brightness field, perform one of the following actions:
•
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
•
If your room lighting is not variable, leave the default value.
b.
In the Auto Color Balance field, perform one of the following actions:
•
If the room uses outside lighting, or has any other conditions that could cause variable room
lighting, click the Enable radio button.
•
If your room lighting is not variable, leave the default value.
c.
In the 50 Hz Flicker Reduction field, click the Disable radio button.