8-16
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 8 Troubleshooting the CTS 3000 and CTS 3200
Managing Hardware Setup
Related Information
For more information about setting up and testing cameras, see the following documentation:
•
Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide
•
Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide
•
For more system troubleshooting information, see the
Cisco TelePresence System Troubleshooting
Guide
on Cisco.com.
Testing Speakers
The speakers are set up successfully when sound can be heard clearly from each one. When running a
test, you can choose whether to cycle through the speakers automatically or manually.
Use the information in the following sections to test the speakers for your system:
•
Testing the Speakers, page 8-16
•
Troubleshooting Speakers, page 8-17
•
Related Information, page 8-17
Testing the Speakers
To test the speakers, follow these steps:
Step 1
Log in to the Cisco TelePresence System Administration window.
Step 2
Choose Troubleshooting > Hardware Setup
Step 3
Click the Speakers radio button.
Step 4
Click Start to begin the speaker test.
Step 5
Click Cycle Through Speakers to have sound cycled automatically for 5 seconds on each speaker.
Step 6
Click Manually Step Through Speakers to test sound on each speaker.
Step 7
Click Next Speaker to progress to the next speaker.
Step 8
Click Stop to end testing.
