6-17
Cisco TelePresence System Release 1.5 Administrator Guide
OL-13676-04
Chapter 6 Troubleshooting the CTS 1100
Managing Hardware Setup
Figure 6-14
Replacing the Camera Cover
Understanding Camera Setup Choices for Room Lighting
If your room has windows that contribute a significant amount of natural light, you can set your CTS to
automatically compensate for variable lighting conditions. This compensation is an average adjustment
and will not be as accurate as the color settings you select for a room that uses fixed, artificial room
lighting.
Table 6-2
contains recommendations for desirable display and camera settings when you set up the
display and camera. See the
“Testing the CTS 1100 Camera” section on page 6-6
for more information.
206624
Cover
release
screws
Cover
release
screws
Table 6-2
Room Configuration and Camera Setup Choices
Physical Room Configuration
Camera Auto Brightness and
Camera Auto Color Balance Setup Choices
No windows, or all external light is covered or blocked Disable
One window
Enable
Two adjacent windows (corner office configuration)
Enable
Two opposing windows
Enable
Windows on three sides
Enable
Windows on four sides
1
1.
Cisco recommends that you cover at least one of the windows.
Enable
