10-5
Cisco TelePresence System Release 1.6 Administration Guide
OL-13676-05
Chapter 10 Monitoring the Cisco TelePresence System
Network Statistics
Network Statistics
Use Network Statistics to view packet transmission statistics collected from the network. Statistics are
listed in columns labeled as if you were looking at the back of the system. For example, on a CTS 3000
or CTS 3200, the labels would indicate statistics from the left, center, and right codecs.
To monitor network statistics, follow these steps:
Step 1
Choose Monitoring > Network Statistics. Statistics for your system appear, as shown in
Figure 10-4
.
Figure 10-4
Network Statistics Window
Step 2
Look for error counters that have been incremented since the last time you viewed these statistics.
Statistic types include the following:
•
False Carrier Sensor Errors
•
Receiver Not Okay Errors
•
Number of TxOctets
•
Number of TxBroadcastPkts
•
Number of TxMulticastPkts
•
Number of TxUnicastPkts
Step 3
Set an interval for updating these reports by choosing the time from the Refresh drop-down menu.
Choices, in minutes, include the following:
•
None (default)
•
1
•
2
•
5
•
10
•
13
•
60
