Repairs and Inspections Required After a Collision
Accident With or Without Air Bag Deployment – Component Inspections
Warning: Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the
vehicle structure return the vehicle structure to the original production configuration. Not properly repairing the vehicle
structure could cause non-deployment of the air bag(s) in a frontal collision or deployment of the air bag(s) for conditions less
severe than intended.
After any collision, inspect the following components as indicated. If you detect any damage, replace the component. If you detect
any damage to the mounting points or mounting hardware, repair the component or replace the hardware as needed.
• The steering column—Inspect the steering column for bending, twisting, buckling or any type of damage.
• The instrument panel knee bolsters and mounting points—Inspect the knee bolsters for bending, twisting, buckling, or any
other type of damage.
• The instrument panel brackets, braces, etc.—Inspect for bending, twisting, buckling, or any other type of damage.
• The seat belts—Perform the seat belt operational and functional checks. Refer to Repairs and Inspections Required After a
Collision .
• The instrument panel cross car beam—Inspect for bending, twisting, buckling, or any other type of damage.
• The instrument panel mounting points and brackets—Inspect for bending, twisting, buckling, or any other type of damage.
• The seats and seat mounting points—Inspect for bending, twisting, buckling, or any other type of damage.
• The roof and headliner mounting points.
• The brake pedal --Inspect the brake pedal for bending, twisting, buckling or any type of damage.
Accident With Frontal Air Bag Deployment – Component Replacement and Inspections
After a collision involving air bag deployment, replace the following components.
• Driver steering wheel air bag
• Passenger instrument panel air bag, if deployed
• Inflatable restraint sensing and diagnostic module (SDM), if SDM has DTC
B0052
56
• Front and/or side impact sensors
• Driver/Passenger seat side air bag, if deployed
• Seat back cover if side seat air bag is deployed
• Driver/Passenger seat belt anchor and/or retractor pretensioners
Perform additional inspections on the following components.
• Steering wheel air bag coil and the coil wiring pigtail—Inspect for melting, scorching, or other damage due to excessive
heat.
• Mounting points or mounting hardware for the passenger instrument panel air bag, steering wheel air bag, SDM, seat side
air bag (if deployed) and seat belt anchor and/or retractor pretensioners—Inspect for any damage and repair or replace
each component as needed.
Accident With Side Seat Air Bag Deployment – Component Replacement and Inspections
After a collision involving driver/passenger side seat air bag deployment, replace the following components.
• Left/right side impact sensors on the side of the impact.
• Left/right roof rail air bag on the side of the impact.
• Inflatable restraint sensing and diagnostic module (SDM), if SDM has DTC B0052 56.
• Inflatable restraint seat belt anchor and/or retractor pretensioner.
• Driver or passenger seat back cushion cover replacement.
Warning: Do not repair or replace the seat stitching or seams in the seat back trim cover with an internal mounted seat side
airbag module. Replace the complete seat back trim cover from the OEM. Non-OEM seat stitching may cause improper airbag
deployment which could result in personal injury.
Perform additional inspections on the following components.
• Mounting points or mounting hardware for the side impact sensors, and driver/passenger side seat air bags on the side of
impact—Inspect for any damage and repair or replace each component as needed.
• Mounting points, mounting hardware, headliner and trim pieces for the left/right roof rail air bag on the side of impact—
Inspect for any damage and repair or replace each component as needed.
• Mounting points or mounting hardware for the SDM and seat belt anchor and/or retractor pretensioners—Inspect for any
damage and repair or replace each component as needed.
• The seat cushion frame
• The seat recliner and cover, if equipped
• The seat adjuster
• The seat back frame
• Door trim assembly
• Impacted seat cushion side covers and switches
Restraints
RESTRAINTS
0-8
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
