Callout
Component Name
Preliminary Procedures
1. Disable the SIR system. Refer to
SIR Disabling and Enabling
.
2. Remove the front fascia. Refer to
Front Bumper Fascia Replacement
.
3. Remove the headlamps. Refer to
Headlamp Replacement
.
4. Remove the front fenders. Refer to
Front Fender Replacement
.
5. Reposition the radiator with the A/C condenser from the upper tie bar. Refer to
Radiator Replacement
.
6. Remove the hood primary and secondary latch. Refer to
Hood Primary and Secondary Latch Replacement
.
7. Remove the front end inflatable restraint discriminating sensor. Refer to
Front End Inflatable Restraint Discriminating
Sensor Replacement
.
1
Front End Upper Tie Bar Bolt (Qty:
4)
Caution:
Refer to
Fastener Caution
.
Tighten
9
N·m (80
lb
in)
2
Front End Upper Tie Bar Lower Bolt (Qty:
4)
Tighten
22
N·m (16
lb
ft)
3
Front Bumper Impact Bar Bolt (Qty:
2)
Tighten
100
N·m (74
lb
ft)
4
Front End Upper Tie Bar
Procedure
1. Disconnect the electrical connectors/harnesses as needed.
2. Disconnect the hood latch cable from the tie bar.
3. Transfer any parts as needed.
Front End Upper Tie Bar Replacement
© 2011 General Motors. All rights reserved.
Bolted Exterior Body Panels and Closures
BODY REPAIR
0-3
BACK TO CHAPTER INDEX
TO MODEL INDEX
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
