Autodesk 495B1-05A111-1301 - 3ds Max Design 2010, Руководство пользователя

Страница: 695 / 916

Adding and Deleting Keyframes
You can add or delete keyframes in a variety of ways when focused in a
Animation Editor.
To add a single keyframe to an animation curve:
1 Press and hold the Alt key.
2 Place the cursor on the curve at the point where you want to add a
keyframe.
3 Click once.
A single keyframe is added.
To delete a single keyframe from an animation curve:
1 Press and hold the Alt key.
2 Move the cursor over an existing keyframe. “K+” will be shown next to
the cursor.
3 If needed, enlarge radius of eraser by pressing Ctrl + click and moving
the cursor to the right (to increase) or to the left (to decrease).
4 Place the cursor on the curve at the point at which you want to remove
the keyframe.
Note that the cursor becomes active (turns from orange to yellow) when
it comes in contact with a keyframe.
Adding and Deleting Keyframes | 683