Atlas Copco PowerMACS 4000, Руководство пользователя

Страница: 654 / 668

Appendix
654 9836 3521 01
10.3 Cycle Data Storage
This scenario exemplifies the number of cycle datas possible to store given a typical reporter
configuration. The setup includes a ToolsNet device and an Ethernet device of type DC PLUS.
Station Data Bolt Data Step Data
Station number Op Mode Failing Step No Step No
Cycle Start Time Bolt No Bolt Pgm Strategy Peak T
Status Status Spindle No A
Data no station Program Name Bolt T Shut Off T
Wp. Id Ordinal No Bolt A Peak T3
Mode No Errors Bolt Name
Station Name RM Errors Program number
Mode Name Warnings Limits (Bolt T)
Station QO Compact Errors Limits (Bolt A)
Station SA Bolt Name
Station AB Cust Error
Id Res 4
Amount of SRAM used
for Cycle Data System with 2 bolts System with 8 bolts System with 16 bolts
30 % (Default)
900 cycles 280 cycles 140 cycles
75 %
2400 cycles 700 cycles 360 cycles
10.3.1 Store 5000 Cycle Data
It is possible to store more than 5000 cycle data by distribute the storage to all TCs included in a system.
The cycle data for each bolt is stored locally on the TC the bolt was run on. To be able to store more than
5000 cycle data the size of the cycle data storage has to be increased on the expense of trace data
storage (there will still be room for more than 20+ trace).
Please see chapter
SRAM
for more information.