Atlas Copco PowerMACS 4000, Руководство пользователя

Страница: 393 / 668

Tightening
9836 3521 01 393
Mnemonic Bit
no. Description
TLM2 86 Final torque too low during monitoring on second buffer
AHM2
87 Angle too high during monitoring on second buffer
ALM2 88 Angle too low during monitoring on second buffer
BUFOVFLM2 89 Monitoring: Overflow in second recording buffer. See description of parameter
"Allow monitoring buffer overrun" in Program Settings.
MTR 90 Min Torque restriction exceeded
GHR
91 Gradient restriction, high limit exceeded
GLR 92 Gradient restriction, low limit exceeded
YAH 93 Yield angle, high limit exceeded
YAL
94 Yield angle, low limit exceeded
OTHER2 95 This is bit is set if any error bit(s) in the range 96 . 127 are set and only the first 12
bytes are included. That is, Type in the reporter is set to "I12".
SS 96 Slip Stick Error
SPINDLE 97 Spindle Error
CONFIG
98 Configuration error
DTH
99 Delta torque high alarm from check
DTL 100 Delta torque low alarm from check
CROT
101 Continue rotation
LTH 102 Low spot torque high alarm from check
LTL 103 Low spot torque low alarm from check
BAH
104 Backlash angle high alarm from check
BAL 105 Backlash angle low alarm from check
ZCH 106 Zero crossing high alarm from check
ZCL
107 Zero crossing low alarm from check
NOKINPUT 108 Step input not OK alarm from check