Atlas Copco PowerMACS 4000, Руководство пользователя

Страница: 471 / 668

Peripheral Devices
9836 3521 01 471
Result data:
The following data is possible to report to DC PLUS. By default only the Torque, Angle, Redundancy
Torque and the Step number is included. The other data can be selected in the reporter if wanted.
Bolt level data
This table describes the data sent to PLUS if the Bolt level data is reported
PI Description Value sent, PW Comment
DM Torque Bolt T
MO Torque high limit Bolt T, high limit Only sent if limits for Bolt T is selected in the reporter
MU Torque low limit Bolt T, low limit Only sent if limits for Bolt T is selected in the reporter
RM Redundancy
torque - No value is sent
DW Angle Bolt A
Are always sent as an integer with unit degrees. The value
is rounded to nearest integer.
WO Angle high limit Bolt A, high limit Only sent if limits for Bolt A is selected in the reporter
WU Angle low limit Bolt A, low limit Only sent if limits for Bolt T is selected in the reporter
RW Redundancy
angle - This value is not possible to send.
ZW Time - No value is sent
PH Step number 0 The step number will always be 0 to indicate that it is bolt
data
ST Current - No value is sent
GD Gradient - No value is sent
Step level data
This table describes the data sent to PLUS if step level data is reported. All the step data will come from
the same step.
PI Description Value sent, PW Comment
DM Torque SO T,
“Shut off torque”
The value reported from a “Check shut off torque” check.
The torque is multiplied by 100 and is sent as an integer (2
decimals rounded).
MO Torque high limit SO T, high limit Only sent if limits for SO T is selected in the reporter
MU Torque low limit SO T, low limit Only sent if limits for SO T is selected in the reporter
RM Redundancy
torque Peak C The current is converted to torque.
DW Angle A Are always sent as an integer with unit degrees. The value
is rounded to nearest integer.
WO Angle high limit A, high limit Only sent if limits for A is selected in the reporter