55
PENDANT STAY MODE DISARM CHIRP to OUTPUT
PENDANT STAY MODE DISARM CHIRP to OUTPUT -
P53E 1-2E (1 = Area A, 2 = Area B)
Option 1 - Output 1
Option 5 - Output 5
Option 2 - Output 2
Option 6 - Output 6
Option 3 - Output 3
Option 7 - Output 7
Option 4 - Output 4
Option 8 - Output 8
When Disarming Stay Mode using a Radio Key it is necessary to have some form of Disarm indication. This can done by
pulsing an Output twice when the Stay Mode is disarmed (two chirps). The Chirps are linked to the pulse time (P39E) for
the output concerned. If Output 1 or 2 are used for the chirp and a horn speaker is connected to the output (see P37E1 or
2E option 1), the siren on the output will give a single tone for the chirp instead of the swept tone used for alarms. Also
Stay Mode Disarming via an Access Tag/Card can generate the Chirp if option 4 is On at P47E.
ARM PULSE to OUTPUT
ARM PULSE to OUTPUT -
P54E 1-2E (1 = Area A, 2 = Area B)
Option 1 - Output 1
Option 5 - Output 5
Option 2 - Output 2
Option 6 - Output 6
Option 3 - Output 3
Option 7 - Output 7
Option 4 - Output 4
Option 8 - Output 8
Sometimes it is necessary to have a single pulse to indicate an Arm state. This could be used to start a video recorder or
similar device. Each time an Area is armed, a single pulse will be applied to the output. The Pulse time (P39E) sets the
length of the pulse .
STAY MODE ARM PULSE to OUTPUT
STAY MODE ARM PULSE to OUTPUT -
P55E 1-2E (1 = Area A, 2 = Area B)
Option 1 - Output 1
Option 5 - Output 5
Option 2 - Output 2
Option 6 - Output 6
Option 3 - Output 3
Option 7 - Output 7
Option 4 - Output 4
Option 8 - Output 8
Sometimes it is necessary to have a single pulse to indicate that Stay Mode is Armed. This could be used to start a video
recorder or similar device. Each time an Area Stay Mode is armed, a single pulse will be applied to the output. The Pulse
time (P39E) sets the length of the pulse .
DISARM PULSE to OUTPUT
DISARM PULSE to OUTPUT -
P56E 1-2E (1 = Area A, 2 = Area B)
Option 1 - Output 1
Option 5 - Output 5
Option 2 - Output 2
Option 6 - Output 6
Option 3 - Output 3
Option 7 - Output 7
Option 4 - Output 4
Option 8 - Output 8
Sometimes it is necessary to have a single pulse to indicate a Disarm state. This could be used to stop a video recorder or
similar device. Each time an Area is disarmed, a single pulse will be applied to the output. The Pulse time (P39E) sets the
length of the pulse.
STAY MODE DISARM PULSE to OUTPUT
STAY MODE DISARM PULSE to OUTPUT -
P57E 1-2E (1 = Area A, 2 = Area B)
Option 1 - Output 1
Option 5 - Output 5
Option 2 - Output 2
Option 6 - Output 6
Option 3 - Output 3
Option 7 - Output 7
Option 4 - Output 4
Option 8 - Output 8
Sometimes it is necessary to have a single pulse to indicate a Disarm of Stay Mode. This could be used to stop a video
recorder or similar device. Each time an Area Stay Mode is disarmed, a single pulse will be applied to the output. The
Pulse time (P39E) sets the length of the pulse.
