97
Output Reset Time
P40E
1-8E
Output 1-8 Reset Time -
0-9999 Seconds (Default = O/P 1=240, O/P 2=0, O/P 3=0, O/P 4=1)
(if option 2 at P37E is on the reset time is in minutes)
Page 51
Output Chime Mode Time
P41E
1-8E
Output 1-8 Chime Timer -
0-255;1/10th Sec increments (Default =10 which is 1 sec)
Page 51
Start of Output “Command Control” Status Messages
P42E
1-8E
Start message Number for Outputs 1-8 “Command Control” -
0-99 (Default = 0)
Page 52
Un-Map an Output
P43E
1-8E
Un-map Outputs 1-8 (remove ALL Defaults from an Output)
Page 52
Assigning a Time-zone to an Output
P44E
1-8E
Time-zones that will control Outputs 1-8
-
Value = Time-zone 1-8 (Default = All Off)
Page 52
AREAS
Area “A” & “B” Options A
P45E
1-2E
Area A&B Options A
1 = Arm Button Required Before Code to Set
Page 52
(1=Area “A”) (Default = All Off)
2 = Stay Button Required Before Code to Set Stay Mode
(2=Area “B”)
3 = Code required to Set
4 = Code Required to Bypass Zones
5 = Spare
6 = Send Arm at the end of the Exit Delay
7 = Can Arm only if All Zones are Sealed (Ready)
8 = Can Arm Stay Mode only if All Zones are Sealed (Ready)
Area “A” & “B” Options B
P46E
1-2E
Area A&B Options B
1 = Near and Confirmed Alarm reporting for All zones in this Area (CID only)
Page 53
(1=Area “A”) (Default = All Off)
2 = Area will arm at end of time-zone
(2=Area “B”)
3 = Area will disarm at beginning of time-zone
4 = Assign Chirps to Access tags
5 = Spare
6 = Spare
7 = Cannot Arm if Zone Unsealed at end of Exit Delay
8 = Spare
Area “A” & “B” Arm Indication to Output
P47E
1-2E
Area A&B Arm Indication to Output
-
Value 1-8 (for Outputs 1-8)
Page 53
(1=Area “A”) (Default = All Off)
(2=Area “B”)
Area “A” & “B” Stay Arm Indication to Output
P48E
1-2E
Area A&B Stay Arm Indication to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = All Off)
(2=Area “B”)
Area “A” & “B” Disarm Indication to Output
P49E
1-2E
Area A&B Disarm Indication to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = All Off)
(2=Area “B”)
Area “A” & “B” Pendant (or Access Tag) Arm Chirp to Output
P50E
1-2E
Area A&B Arm Chirp to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = 2)
(One chirp to the output for arm)
(2=Area “B”)
Area “A” & “B” Pendant (or Access Tag) Stay Arm Chirp to Output
P51E
1-2E
Area A&B Stay Arm Chirp to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = All Off)
(One chirp to the output for stay arm)
(2=Area “B”)
Area “A” & “B” Pendant (or Access Tag) Disarm Chirp to Output
P52E
1-2E
Area A&B Disarm Chirp to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = 2)
(Two chirps to the output for disarm)
(2=Area “B”)
Area “A” & “B” Pendant Stay (or Access Tag) Disarm Chirp to Output
P53E
1-2E
Area A&B Stay Disarm Chirp to Output
-
Value 1-8 (for Outputs 1-8)
Page 54
(1=Area “A”) (Default = All Off)
(Two chirps to the output for disarm)
(2=Area “B”)
