22
LCD KEYPAD “LOCAL EDIT” PROGRAM MODE
The Local Edit Program Mode allows the programming of a customised “System Name” (the name displayed during
idle mode at the keypad), Customised “Zone Names” (the text that appears on the keypad when a zone is unsealed),
Customised “User Names” (the User name that will appear when viewing arm/disarm events in memory mode), Custom-
ised “Area Names” (the Area name that will appear when viewing arm/disarm events in memory mode) and Customised
“Output Names” (the Output name that will appear when viewing Output On/Off events in memory mode).
ACCESSING LOCAL PROGRAM MODE
To enter
“Local Program Mode”
on the LCD Keypad, press AND HOLD the
<CONTROL>
button down and within 3 sec-
onds press and hold the
<ARM>
button until the displays shows
“Local Mode”
.
When in Local Program Mode, the display will show
“local mode kb 1”
with the number 1 meaning the keypad address is
currently 1.
There are two ways to program the keypad in “Local Edit Mode”. You can enter in the program location directly from the
list below or you can use the menu function to navigate through all of the program options. The menus are described on
the following pages.
LOCAL EDIT MODE DIRECT PROGRAM ADDRESSES
There are a number of program addresses available to you at this point. They are;
<PROG> <1> <ENTER>
Zone #1 Text (maximum 16 characters)
TO
<PROG> <16> <ENTER>
Zone #16 Text
<PROG> <800> <ENTER>
Update editable text to all LCD Keypads
<PROG> <801> <ENTER>
Return all editable Text to Default
<PROG> <995> <ENTER>
Panel Type
<PROG> <996> <ENTER>
Set Keypad
Address Number, from 1-8
<PROG> <997> <ENTER>
Keypad Language
<PROG> <998> <ENTER>
Area Identifying Character (assigning numbers or letters to Areas)
<PROG> <999> <ENTER>
Panel Name Display (maximum 16 characters)
<PROG> <1001> <ENTER>
Program User #1 Name
TO
<PROG> <1100> <ENTER>
Program Users #100 Name
<PROG> <2001> <ENTER>
Area “A” Identifying Name (maximum 16 character Area name)
<PROG> <2002> <ENTER>
Area “B” Identifying Name (maximum 16 character Area name)
<PROG> <3001> <ENTER>
Program Output #1 Name
TO
<PROG> <3008> <ENTER>
Program Output #8 Name
