manualshive.com logo in svg

Amsco Century, Руководство оператора

Поделиться
Скачать
Amsco Century Скачать руководство пользователя страница 82

8-10

129373-496

Operating Instructions

Programming Cycle Values

•

Pressing 

UNDER TEMP

 advances display to screen #35. Enter under

temperature value using the numeric keypad. Temperature appears on
display as it is being entered.

If an under temperature alarm occurs, cycle operation will hold until the
sterilize temperature recovers. Once minimum temperature is reached,
sterilize phase may be programmed to either restart or resume at the time
when the alarm is cleared. Current programmed setting is shown in the
display screen, as indicated below.

35

CHANGE VALUES - UNDER TEMP

RETURN

1

2

3

4

5

6

7

8

9

←

←

←

←

←

0

→

→

→

→

→

STERILIZE

TIME RESUME

SET UNDER TEMP

1.0 C

The sterilize temp.

minus the under

temp. is the minimum sterilize

temp.

before an under temp.

alarm occurs.
If the alarm clears,

the sterilize time

will RESTART.

Pressing STERILIZE TIME RESUME will program control to resume the
sterilize phase time once the alarm clears.

•

Pressing 

OVER TEMP 

advances display to screen #36. Enter over

temperature value using the numeric keypad. Temperature appears on
display as it is being entered.

Pressing 

←

 or 

→

 on numeric keypad

moves the cursor to the left or right,
respectively.

Pressing RETURN saves the changed
cycle value and returns display to screen
#21.

36

CHANGE VALUES - OVER TEMP

RETURN

1

2

3

4

5

6

7

8

9

←

←

←

←

←

0

→

→

→

→

→

SET OVER TEMP

06.0 C

The over temp.

plus the control

temp. is the maximum sterilize

temp.

before an over temp.

alarm occurs.

If the alarm clears,

the sterilize time

will resume.

Pressing 

←

 or 

→

 on numeric keypad

moves the cursor to the left or right,
respectively.

Pressing RETURN saves the changed
cycle value and returns display to screen
#21.

Current

Programmed

Setting

Содержание Century






























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды