![Amsco Century Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/amsco/century/century_operators-manual_2936190024.webp)
4-3
Component Identification
Operating Instructions
129373-496
4.3 Control Panel
The Control Panel, located on load end of the sterilizer, is used to direct all
sterilizer functions (see Figure 4-3). The operator may control cycle operation,
program cycles and sterilizer operating parameters, and monitor cycle
performance from the control panel.
Printer
Touch
Screen
Printer Access
Door
Printer Access Door Open
Printer Access Door Closed
Touch
Screen
Cycle
Printout
Figure 4-3. Control Panel
The touch screen allows the user to operate and program the sterilizer control
by touching (pressing) the appropriate touch-sensitive areas on the display.
On each screen, all rectangular-outlined boxes are touch-sensitive areas,
referred to as "buttons" (see Figure 4-4).
Refer to
S
ECTION
5, C
ONTROL
I
NTERFACE
, for further details on interfacing with the
control system's touch screen.
4.3.1 Touch Screen
9
GRAVITY CYCLE
PHASE:
PURGE
TIME LEFT IN PHASE:
1:00
CHAMBER:
32.0 C
00.0 psig
PROJECTED CYCLE COMPLETION TIME:
47:10
m:s
ABORT
Phase in Progress
Phase Status
Current Chamber Status
Status Print
Button
(Touch-sensitive
Area)
Abort Button
(Touch-sensitive Area)
STATUS
Figure 4-4. Example of In-cycle Touch Screen
Screen Reference
Number
Cycle in Progress
Projected Cycle Completion Time
(approximate time remaining in
cycle - actual time may vary)