Unpacking an FSP 3000R7 ROADM-C40/40/2-3HU-2DC Shelf
108
Installation and Commissioning Manual
F
S
P
3000R
7 R
11
.1 8000
0015930
Issue
B
, ©
2012
ADVA AG Optical Netw
orking
ADVA Conf
idential
Step 4
Verify you have the proper shelf type. Check the shelf type label on
the side for identification.
Step 5
Verify you have the following items:
•
Mounting brackets, 19 inch to 23 inch (only used for 23 inch rack
installations)
•
Chassis mounting screws
•
Red 14 -gauge wire
•
Black 14 -gauge wire
•
Ring terminals
•
10 A fuses
Make a note of missing items, if necessary.
Step 6
Visually check the ROADM-C40/40/2-3HU-2DC shelf for signs of
external damage.
Step 7
If you are not mounting ROADM-C40/40/2-3HU-2DC chassis in a
rack, then place the chassis back into the cardboard box and close
the box. Otherwise, save the cardboard box along with the packaging
material for re-use.
Step 8
If any discrepancies are found, proceed as follows:
a) If the ROADM-C40/40/2-3HU-2DC has been damaged in transit,
immediately report the extent of damage by filing a claim with the
transportation company. Notify your ADVA Optical Networking
customer service representative or ADVA Optical Networking as
well. Have the following information ready:
•
Invoice number of shipper
•
Name of damaged unit
•
Serial number and item number of the damaged unit
•
Description of damage
•
Effect of damage on the installation
If damaged unit must be returned to the factory, refer to
. Order replacement equipment if neces-
sary.
b) If any standard item is missing, notify your ADVA Optical Net-
working customer service representative or ADVA Optical Net-
working immediately.
Risk of damage due to electrostatic discharge!
Keep the ROADM-C40/40/2-3HU-2DC in its box until you are ready to
inspect it.
P
S
Note
Do not destroy or discard the cardboard box. Flatten and save it along
with the packaging material. This way you can transport a shelf safely
or, if necessary, return it to the factory for repair.