Yamaha YZ250(V), Owner'S Service Manual

Page: 462 / 596

5-47
CHAS
HANDLEBAR
7. Install:
9 Roller
1
9 Collar
2
NOTE:
9 Apply the lithium soap base grease on the
roller sliding surface and cable guide.
9 Install the roller so that the “UPPER” mark
a
faces upward.
9 Pass the throttle cable in the groove
b
in the
roller.
8. Install:
9 Throttle cable cap
1
9 Screw (throttle cable cap)
2
9. Adjust:
9 Throttle grip free play
Refer to ”THROTTLE CABLE ADJUST-
MENT” section in the CHAPTER 3.
10. Install:
9 Cap cover
1
1 Nm (0.1 m•kg, 0.7 ft•lb)
6. Install:
9 Throttle cable
1
To tube guide
2
.
NOTE:
Apply the lithium soap base grease on the throt-
tle cable end and tube guide cable winding por-
tion.
1P8-9-31-5C 5/12/05 11:28 AM Page 12