Yamaha YZ250(V), Owner'S Service Manual

Page: 120 / 596

2-14
CABLE ROUTING DIAGRAM
SPEC
EC240000
CABLE ROUTING DIAGRAM
1 “ENGINE STOP” button lead
2
Throttle cable
3
Clutch cable
4
Clamp
5 Wireharness
6
Radiator breather hose
7
Air vent hose
8
Crankcase breather hose
9 Overflow hose
A
Pass the clutch cable on the
outside of the throttle cable and
“ENGINE STOP” button lead.
B
Align the throttle cable locating
tape with the cable guide.
C
Pass the throttle cable, clutch
cable and “ENGINE STOP” but-
ton lead above the radiator
hose.
D
Clamp the “ENGINE STOP” but-
ton lead to the frame. Tighten
the clamp so that the “ENGINE
STOP” button lead is not pulled
when the handlebar is turned to
the right and left.
E
Clamp the throttle cable, clutch
cable and wireharness to the
frame.
F
Clamp the throttle cable and
wireharness to the frame.
G
Pass the clutch cable in front of
the center of the cylinder head
tightening nut.
H
Pass the air vent hose, overflow
hose and crankcase breather
hose between the frame and
connecting rod.
I
Locate the clamp ends in the
arrowed range.
J
Pass the throttle cable behind
the air vent hose.
K
Pass the air vent hose, overflow
hose and crankcase breather
hose so that they do not contact
the rear shock absorber.
L
Clamp the air vent hoses.
1P8-9-31-2 5/19/05 10:30 AM Page 54