7-19
SETTING
TUN
EC72G020
Setting of spring after replacement
After replacement, be sure to adjust the spring to
the set length [sunken length 90~
100 mm (3.5~3.9 in)] and set it.
1. Use of soft spring
9
Set the soft spring for less rebound damp-
ing to compensate for its less spring load.
Run with the rebound damping adjuster
one or two clicks on the softer side and
readjust it to suit your preference.
2. Use of stiff spring
9
Set the soft spring for more rebound damp-
ing to compensate for its greater spring
load. Run with the rebound damping
adjuster one or two clicks on the stiffer side
and readjust it to suit your preference.
Adjusting the rebound damping will be fol-
lowed more or less by a change in the com-
pression damping. For correction, turn the
low compression damping adjuster on the
softer side.
c
C
When using a rear cushion other than cur-
rently installed, use the one whose overall
length
a
a
does not exceed the standard as
it may result in faulty performance. Never
use one whose overall length is greater
than standard.
å
Coverage of spring by weight
∫
Rider weight
1
Soft
2
Standard
3
Stiff
Length
a
a
of standard shock:
490 mm (19.29 in)
1P8-9-31-7 5/19/05 1:31 PM Page 42
Summary of Contents for YZ250(V)
Page 78: ...2 11 MAINTENANCE SPECIFICATIONS SPEC MEMO...
Page 594: ...TUN MEMO...
