Yamaha YZ250(V), Owner'S Service Manual

Page: 366 / 596

4-75
TRANSMISSION, SHIFT CAM AND SHIFT FORK
ENG
4. Install:
9
Spacer
1
NOTE:
9
Apply the lithium soap base grease on the oil
seal lip.
9 When installing the spacer into the crankcase,
pay careful attention to the crankcase oil seal
lip.
9 Install the spacer with its chamfered side
a
facing the crankcase.
3. Install:
9
Plain washer
1
9 Circlip
2
NOTE:
9 Be sure the circlip sharp-edged corner
a
is
positioned opposite side to the plain washer
and gear
b
.
9 Be sure the circlip end
c
is positioned at axle
spline groove
d
.
2. Install:
9 2nd wheel gear (23 T)
1
9 4th wheel gear (24 T)
2
9 3rd wheel gear (23 T)
3
9 5th wheel gear (20 T)
4
9 1st wheel gear (27 T)
5
9 O-ring
6
To drive axle
7
.
NOTE:
9 Apply the molybdenum disulfide oil on the inner
and end surface of the idler gear and on the
inner surface of the sliding gear, then install.
9 Apply the lithium soap base grease on the O-
ring.
1P8-9-31-4C 5/12/05 1:21 PM Page 52