INSP
ADJ
12.Connect:
• Coolant hoses
13.Install:
• Rear cover
14.Install:
• Coolant hose
15.Install:
• Side under cover (right)
Refer to “COWLINGS” in CHAPTER 3.
16.Install:
• Intake silencer
Refer to “FUEL INJECTION” in CHAPTER 7.
17.Fill:
• Cooling system
CAUTION:
• Hard water or salt water is harmful to
engine parts. If soft water is not available,
use boiled or distilled water.
• Do not use water containing impurities or
oil.
Bolt (rear cover):
3 Nm (0.3 m•kg, 2.2 ft•lb)
Recommended coolant:
High quality silicate-free
ethylene glycol antifreeze
containing corrosion inhibitors
Coolant mixing ratio
(coolant:water)
3:2 (60%:40%)
Total amount:
For RX10RTL / RX10RL /
RX10RTRL / RX10RSL / RXW10L
6.0 L (5.28 Imp qt, 6.34 US qt)
For RX10ML
6.4 L (5.63 Imp qt, 6.76 US qt)
7
COOLING SYSTEM
Summary of Contents for RX10RTL
