Yamaha RX10RTL, Supplemental Service Manual

Page: 150 / 355

FI
29
Suspension for the
adjustment of
damping force The following connection judgment result is transmitted to the
meter. When the connection judgment is “Connected”: H’00
When the connection judgment is “Not connected”: H’F0
The following item is performed only when the connection
judgment is “Connected”. Set ECS to Hard when 1 second has
passed after the grip warmer down side switch is changed from
OFF to ON. (Pattern 1): Set ECS to Soft when 5000 ms has
passed after the power is supplied. (Pattern 2): Turn ECS OFF
when 5000 ms has passed after the power is supplied. However,
if the switch input (Grip warmer down side switch: from OFF to
ON) changed before the operation as mentioned above is
finished, stop the driving operation and start the operation newly.
Light the engine warning lamp while the condition (Pattern 1) as
mentioned above is turned ON. Blink the engine warning lamp
while the condition (Pattern 2) as mentioned above is turned
ON. (Period: 1 s, Duty: 50%) When it is moved to other code, the
operation as mentioned above should be stopped immediately.
The operation mentioned above is repeated every time the grip
warmer down side switch is changed from OFF to ON. –
30
Ignition coil #1 After the engine stop switch has been turned from OFF to ON, it
actuates ignition coil #1 for five times every second and
illuminates the engine trouble warning light.
* Connect an ignition checker.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check that spark is generated,
5 times with the engine stop
switch ON.
31
Ignition coils #2 After the engine stop switch has been turned from OFF to ON, it
actuates ignition coil #2 for five times every second and
illuminates the engine trouble warning light.
* Connect an ignition checker.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check that spark is generated,
5 times with the engine stop
switch ON.
32
Ignition coil #3 After the engine stop switch has been turned from OFF to ON, it
actuates ignition coil #3 for five times every second and
illuminates the engine trouble warning light.
* Connect an ignition checker.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check that spark is generated,
5 times with the engine stop
switch ON.
33
Ignition coil #4 After the engine stop switch has been turned from OFF to ON, it
actuates ignition coil #4 for five times every second and
illuminates the engine trouble warning light.
* Connect an ignition checker.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check that spark is generated,
5 times with the engine stop
switch ON.
36
Injector #1 After the engine stop switch has been turned from OFF to ON, it
actuates the injector #1 five times every second and illuminates
the engine trouble warning light.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check the operating sound of
the injector five times with
engine stop switch ON.
37
Injector #2 After the engine stop switch has been turned from OFF to ON, it
actuates the injector #2 five times every second and illuminates
the engine trouble warning light.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check the operating sound of
the injector five times with
engine stop switch ON.
38
Injector #3 After the engine stop switch has been turned from OFF to ON, it
actuates the injector #3 five times every second and illuminates
the engine trouble warning light.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check the operating sound of
the injector five times with
engine stop switch ON.
39
Injector #4 After the engine stop switch has been turned from OFF to ON, it
actuates the injector #4 five times every second and illuminates
the engine trouble warning light.
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
Check the operating sound of
the injector five times with
engine stop switch ON.
Diagnostic
code
Item Description of action
Data displayed on meter
(reference value)
FUEL INJECTION SYSTEM
69