Yamaha RX10RTL, Supplemental Service Manual

Page: 281 / 355

SPEC
NOTE:
1. First, tighten the bolt to approximately 15 Nm (1.5 m•kg, 11 ft•lb) with a torque wrench, then
loosen the bolt completely.
2. Retighten the bolt to 15 Nm (1.5 m•kg, 11 ft•lb), and tighten another 65 ~ 70° with a angle gauge.
Parts to be tightened
Tightening torque
Remarks
Nm m•kg ft•lb
Crankcase (M9
×
1.5) (1st) 15 1.5 11 See NOTE.
(2nd)
15 + 65 ~ 70° 1.5 + 65 ~ 70° 11 + 65 ~ 70°
Crankcase (M6
×
1.0) 12 1.2 8.7
Countershaft cover 12 1.2 8.7
A.C. magneto rotor cover 12 1.2 8.7
Starter clutch 12 1.2 8.7
Stator coil 10 1.0 7.2 Apply LOCTITE
®
Starter motor 27 2.7 20
Pickup coil 6 0.6 4.3
Pickup coil plate 10 1.0 7.2
Fuel pump 7 0.7 5.1
Oil pressure switch 15 1.5 11
Cylinder identification sensor 8 0.8 5.8
Ignition coil 10 1.0 7.2
TIGHTENING TORQUE
129