INSP
ADJ
0
PERIODIC INSPECTION AND ADJUSTMENT
INTRODUCTION
This chapter includes all information necessary to perform recommended inspections and adjust-
ments. These preventive maintenance procedures, if followed, will ensure more reliable machine
operation and a longer service life. In addition, the need for costly overhaul work will be greatly
reduced.
This information applies to machines already in service as well as new machines that are being pre-
pared for sale. All service technicians should be familiar with this entire chapter.
PERIODIC MAINTENANCE CHART FOR THE EMISSION CONTROL
SYSTEM
Item
Remarks
Pre-opera-
tion check
(Daily)
Initial
1 month
or
800 km
(500 mi)
(40 hr)
Every
Seasonally
or
4,000 km
(2,500 mi)
(200 hr)
Spark plugs
Check condition.
Adjust gap and clean.
Replace if necessary.
Valves clearance
Check clearance.
Adjust clearance when engine is cold.
Every 40,000 km (25,000 mi)
Crankcase breather system
Check breather hose for cracks or damage.
Replace if necessary.
Fuel filter
Check condition.
Replace if necessary.
Fuel line
Check fuel hose for cracks or damage.
Replace if necessary.
Idle speed
Check and adjust engine idle speed.
Fuel injection
Adjust synchronization.
Exhaust system
Check for leakage.
Tighten or replace gasket if necessary.
INTRODUCTION/PERIODIC MAINTENANCE
CHART FOR THE EMISSION CONTROL SYSTEM
2
Summary of Contents for RX10RTL
