2-12
INSP
ADJ
VALVE CLEARANCE ADJUSTMENT
• Install the new valve pad
1
and the valve lifter
2
.
NOTE:
• Apply molybdenum disulfide oil to the valve pad
and the valve lifter.
• The valve lifter must turn smoothly when rotated
by hand.
• Install the valve lifter and the valve pad in the cor-
rect place.
• Install the exhaust and intake camshafts, timing
chain and camshaft caps.
NOTE:
• Refer to “CAMSHAFTS” in CHAPTER 5.
• Lubricate the camshaft caps, camshaft lobes,
camshaft journals and camshaft cap bolts.
• Align the camshaft marks with the camshaft cap
marks.
• Rotate the crankshaft clockwise several turns to
seat the parts.
• Measure the valve clearance again.
• If the valve clearance is still out of specification,
repeat all of the valve clearance adjustment
steps until the specified clearance is obtained.
9. Install:
• Crankshaft end accessing screw
• Timing mark accessing screw
10. Install:
• Cylinder head cover
Refer to “CAMSHAFTS” in CHAPTER 5.
11. Install:
• All removed parts
NOTE:
For installation, reverse the removal procedure.
Note the following points.
T
R
.
.
Camshaft cap bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
1
2
Summary of Contents for RS90K
