Yamaha RS90K, Service Manual

Page: 228 / 841

3-8
CHAS
STEERING
4. Check:
• Rod end movement
Rod end free play exists
→
Replace the rod
end.
Rod end turns roughly
→
Replace the rod
end.
5. Inspect:
• Right relay arm 1
• Left relay arm
2
• Idler arm 3
Cracks/damage
→
Replace.
• Bearings 4
Wear/damage
→
Replace.
2
1
3
4
INSTALLATION
1. Install:
• Relay arms
1
• Bushings
• Washers
2
• Clips 3
T
R
.
.
Relay arm bolt:
67 Nm (6.7 m · kg, 48 ft · lb)
2. Install:
• Idler arm
1
• Bushings
• Washers
• Relay rod
2
• Cotter pins
CAUTION:
Always use new cotter pins.
NOTE:
Install the idler arm with the “R” mark
a
on the right
side facing towards the rear of the machine.
T
R
.
.
Idler arm nut:
35 Nm (3.5 m · kg, 25 ft · lb)
Relay rod-idler arm nut:
30 Nm (3.0 m · kg, 22 ft · lb)