background image

OWNER’S MANUAL

READ THIS MANUAL CAREFULLY!

It contains important safety information.

w

LIT-11626-18-07

5TH-28199-13

This ATV should not be ridden by anyone under 12 years of age.

YFM80RT

PRINTED IN JAPAN

2004.4-2.0x1 

!

(E)

Improper ATV use can result in SEVERE INJURY or DEATH.

q

WARNING

ALWAYS USE

AN APPROVED

HELMET AND

PROTECTIVE GEAR

NEVER USE 

ON PUBLIC

ROADS

NEVER CARRY

PASSENGERS

NEVER USE

WITH DRUGS

OR ALCOHOL

NEVER operate:

9

without proper training or instruction.

9

at speeds too fast for your skills or the
conditions.

9

on public roads - a collision can occur with
another vehicle.

9

with a passenger - passengers affect 
balance and steering and increase risk
of losing control.

ALWAYS:

9

use proper riding techniques to avoid
vehicle overturns on hills and rough
terrain and in turns.

9

avoid paved surfaces - pavement may 
seriously affect handling and control.

EBU00438

LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS.

(For replacement manual, call 1-800-532-1558)

YAMAHA MOTOR CO., LTD.

PRINTED ON RECYCLED PAPER

5TH-9-13_Hyoshi  23/3/04 3:45 PM  Page 1

Summary of Contents for RAPTOR YFM80RT

















































































































































Reviews: