Xerox Document Centre 420, User Manual

Page: 97 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 3-37
Co
py
NOTE: 2 1, Bound Originals, Image Shift, Transparencies,
Booklet Creation, Gray Scale Copying (DC426/420) , Build
Job, Mixed Size Originals or Annotation cannot be used with
this feature.
Use the following steps to program N Up on the DC440/432/
430/425 .
¾ Load the documents in the
document feeder. Documents
must be loaded long edge
feed.
¾ Make the required feature
selections for the job. Select
[Paper Supply] and the
paper size required.
¾ Select [Added Features]
and then [Output Format] .
¾ Select [N Up] .
¾ Select either [2 Up] or [4 Up] .
¾ Select landscape or portrait
and then
[Save] .
¾ Enter the quantity.
Select [Start] .
On the DC426/420:
¾ Select [Added Features]
and then [Output Format] .
¾ Select [2 Up] .
¾ Select [On] .