Xerox Document Centre 420, User Manual

Page: 127 / 466

Xerox Document Centre 440/432/430/426/425/420 User Guide Page 4-11
Fa
x
NOTE: If entering more than 50 numbers, the message Input
limit exceeded is displayed and the additional numbers are
ignored.
HINT: To cancel the job and all selected destinations, select
Stop .
Dialing Characters
Dialing characters are special characters that are used for
entering fax numbers. Some characters are used only when
auto dialing, such as
: , ! , / , - and = . Dialing characters are
entered as part of the fax number. As Dial Pause [-] is so
commonly used, it is available as a button on the control panel
and also in the list of Dialing Characters.
Depending on the setup of the telephone and communication
lines, some or all of the following characters will need to be
used.
¾ Select [Next Destination] .
The number appears in the
list.
¾ Repeat steps 3 and 4 until all
the numbers have been
entered.
¾ Select [Save] .
¾ Select the character required.
¾ Select [Add] .
¾ Repeat the above steps for
each character.
¾
Select [Enter] to exit.